CPB-3010

Mobile Phone/Cellula Phone

/Breaker/Immobilizer System

 
 
 
Specifications
Tx Frequency
  851/869 - 894 MHz
  925/936 - 965 MHz
  1800 - 1990 MHz
  2110 - 2170 MHz
Total output power£º
  Hi 24 W ( 800: 8W, 900: 8W, 1800-1950: 8W )
  Low 12 W ( 800: 4W, 900: 4W, 1800-1950: 4W )
Total output power include Option 3G:
  Hi 32W ( 800: 8W, 900:8W ,1800-1950:8W ,2100-2200:8W )
  Low 16W ( 800: 4W, 900:4W ,1800-1950:4W ,2100-2200:4W )
Cover interface standards
  AMPS,N-AMPS, NMT,TACS,GSM,CDMA,TDMA,IDEN,UMTS,3G
Designed to cut off wave only in the down-link band width, Therefore it doesn't affect any Interference to base station and repeater
RF output indicating of LED display
VSWR over protection for each modular.
Two fans of convection and add metal filter.
Option for RS-485 protocol
ID switch
TNC antenna connecter
IR Remote Control ( 8-10 M )
Automatic power switching power supply
  50/60Hz/AC 100 ~ 240V transmitting to DC 24V
Dimension
  345mm (L)¡Á 187mm (W)¡Á 58mm (H)
Dimension
  2.5kg
Operating temperature
  -10 ¡æ ~ + 60 ¡æ
Humidity
  5% ~ 80%
Jamming range
  Radius 50 - 100 M up the signal must <-80dBm in the location
Safety regulation
  AC Adapter UL (E190582)
  CSA (LR112971 Level 3)
 
   
 
 
Installation
  01.Take the Breaker out of the packing box.
  02.Plug in the antenna according to the frequencies (color).
  03.Plug in the AC power and then plug in DC jack to the Jammer.
  04.When the LED are on, four bands of the Jammer are activated.
   
Important Notice
  Before turn on the power, please make sure all antennas are correctly plug in.
  The antennas have to plug in according to the frequency to the right connector to prevent short circuit.
Adjust High / Low power of each band
  Step 1 Find the sliver sticker on the bottom of the device.
  Step 2 Open the sticker.
  Step 3 According to the demand to switch high / low of each band.
 
Solution-Center control by RS-485
 
   
 
 
Download Product Data Sheet